Gerber Affinity Framelock Copper 18

Um meine Sammlung von Messern mit Kupfer-Griffschalen zu erweitern, habe ich mir dieses Messer von Gerber gekauft. Um es in Deutschland führen zu dürfen, musste der Einhand-Öffnungs-Pinorkel (Thumb Stud) ab, was sehr leicht ging. Es ist ohne selbigen nicht mehr einhändig zu öffnen und daher aus meiner Sicht führbar (keine Rechtsberatung). Das Design finde ich speziell, die Haptik finde ich gut. Es hat aufgrund des Kupfers sein Gewicht...ich finde das aber angenehm. Die Verarbeitung finde ich gut...da wackelt nichts und die Klinge läuft gut. Ich bin bisher sehr zufrieden.

At £25.00 ish at the time of buying. It's forgivable that the folding mechanism is really stiff and hard to engage. But if you're looking for a flippy folder that's easy to use with one hand then look elsewhere. The copper handle scale is really beautiful and I'm sure will take on a nice patina over time. The blade steel is good and comes pretty sharp out of the box. I have loosened the square head screw a little and oiled the mechanism with some clipper oil and it moves more freely than before but it's still pretty stuff. Moving the thumb stud down half an inch with a torx driver improves leverage on the mechanism a little. The thumb stud it's self has a bit of a sharp corner on it and it doesn't grip well so you end up with a bit of pressure point on the end of your thumb with repeated use. With all that considered, I still have it down to a one handed opener with a little adjustment and technique. Decent for opening packages around the home.

£25 for a D2 blade and one-and-a-bit core scales is very cheap, so it's hard to complain about what is ultimately a nice looking, functional knife. The action is not great (very stiff) and the lock is even stiffer. It's pretty difficult to disengage, especially as a left-hander. The pivot has a square-head screw. The clip is in a terrible position, but I can't get one of the T6 screws out without stripping it. The blade is sharp but off-centre. So while ten minutes of fiddling and adjusting would make it much better, I can't do any of that. However, it's £25 so you're still getting decent value.

Now I am the owner of a few Gerber blades now and overall a fan of the budget edc market, mainly as I either wear them out or lose them camping and hiking. For what you get it's a no brainer for me, good chunky blade, good hand feel and with the minimum of fettling is hard to beat. I don't mind a bit of titivation at this price point, I've not spent over £100 on it where I expect great quality, so for Joe Average it's a steal imho.

Good solid kinife, great value for a D2 steel.

I am a Huge Fan of Gerber products and this One does not Fail. It’s Solid and Substantial with a Good Motion and liner lock. Would definitely buy again!

Let's be honest, it's a framelock in a half decent steel and it costs nothing. That's where the accolades end. Awful build quality, sharp edges galore. The surface finish on the copper is horrific. The action? Non-existent. The first one I received was locking up so late the detent ball was digging a hole on the scale. My replacement locks up at 90+ percent, more like 100 on an enthusiastic flick. I only bought it as a beautification project, shipwreck patina on the copper, blade/frame stonewashed etc. Gerber apparently don't like that idea. The only screw held in with Loctite is the dumb one-sided thumbstud, everything else is epoxied. Even the baffling pivot. I achieved what I set out to do but it fought me at every turn. I cannot recommend this knife at all if you're the sort of collector who performs any kind of maintenance. It only gets two stars because I managed to drastically improve the action after the traumatic tear-down (and it's super pretty now).

Good value, well put together, stylish item and razor sharp from box. Slender blade of a useful size.

Great knife with smooth action a slick look, only down side is it is only right hand opening as I am a lefty.